一．Product Introduction
Sampling Ball Valves fully lined or in stainless steel with full port for safe and defined sampling with no process interruption. Sampling of corrosive media and process media with solids out of pipelines and vessels.
二.product Features
1.Easy and safe operation
2.No dead space design
3.Modular design for optional adapter upgrades
4.Lockable handwheel
5.Handwheel two-Step Operating（Pull to rotate） to avoid misoperation
6.Automatic closing after release the handwheel
7.Bellow seal or Package seal for Options
8.Flange , clamp and wafer connection design
9.Precise sampling
10.Corrosion resistance
11.Minimal product loss
三.Technical data
| Version | DIN/ISO | ANSI |
| Sizes | DN15 – DN150 | ½” – 6″ |
| Pressure | PN16/40 | ANSI 150lbs (ANSI 300lbs) |
| Flanges | EN 1092-1 B1 | ASME B16.5 RF |
| Face to face | EN 558-1 range 1 | ASME B16.10 |
| Special length | DIN/ISO/ANSI: short pattern 62 mm | |
| Body | 1.4408 | AISI 316 CF-8M |
| 1.4404 | AISI 316L CF-3M | |
| Lining | PFA, PFA-AS (conductive) | |
| Spindle | 1.4404 | AISI 316L CF-3M |
| Piston injector | 1.4408 | AISI 316 CF-8M |
| Borosilicate glass / PFA, | ||
| PFA-AS-encapsulated (conductive) | ||
| Operating conditions | (depending on material selection) | |
| Pressure | 1mbar up to 50 bar (piston injector max. 10bar) | |
| Temperature | -40°C up to +280°C | |