admin

The types and structures of the regulating mechanisms of pneumatic actuators are roughly the same, with the main differences lying in the actuating mechanisms. Therefore, the introduction of pneumatic actuators is divided into two parts: the actuating mechanism and the control valve. A pneumatic actuator consists of two components: an actuating mechanism and a control valve (regulating mechanism). […]

Valves are essential components for regulating fluid flow and pressure in many industrial applications. Two popular types of valves are electric valves and pneumatic valves, which use different mechanisms to control fluid flow. In this article, we will discuss the use cases and advantages of each type of valve. Electric Valves Electric valves are powered

Before choosing a solenoid valve, you need to know some parameters to make a better choice. This content is to introduce these key parameters. Important Notes: Solenoid valves are very sensitive to dirt and only work with clean liquids or air. Otherwise, you need a filter to filter the media in order to use the

As industrial automation designs are updated and iterated, the requirements for equipment are becoming more diverse. This is also true for valves. To meet the different requirements, different valves and valve actuators are used. In order to seek the most suitable valve actuator, then it is essential to understand valve actuators. I will introduce the

You may have heard of hydraulics, which utilizes pressure from fluids for automation, but have you heard of its cousin, pneumatics? Pneumatics provide valuable tools and actions for a plethora of industries, but the pressurized systems require several safety components. A pneumatic valve is one of them. If you utilize pneumatics in your career, it’s

Here we discuss the aspects of pneumatic control valves that are better than electric control valves. Before that, we need to explain pneumatic control valves vs. electric control valves. What is a Control Valve? Control Valve is a device that is used to regulate or manipulate fluid flow. It surrenders all control over the fluid flow

Valves are not only used in a wide range of industries, but also in different environments, and some valves in harsh working environments are prone to problems. As the valve is important equipment, especially for some large valves, once the problem requires repair or replacement is quite troublesome. So it is especially important to do

Pre sales services Assist users in product selection. Provide product introduction, performance parameters, installation dimensions and relevant precautions of the product ordered by users. Provide other technical data required by users. In sale Provide the ordered products on time, according to the quality and quantity. Our company is responsible for providing quality insurance and other

Installation And Use: The pneumatic actuator has undergone necessary performance testing before leaving the factory and can be directly installed and used according to the requirements in general. Users do not need to test it again. If the design needs to be changed, it must be carried out by the manufacturer;After the installation, it is

Common Faults And Troubleshooting Methods: Whether the manual device is jammed, whether the air circuit is blocked.Solution: Repair the manual device, clear the air circuit. Whether the actuator is leaking, whether the air pressure is too low, whether the valve stem is deformed.Solution: Repair the actuator, increase air pressure, replace the valve stem. Whether the